FE 24-240mm F3.5-6.3 OSS
Download Install
Installation Instructions
- Download the Update_SEL24240V2D.exe file to a directory on your computer, and make note of this directory for reference.
- Go to the directory where the file was downloaded and double-click the Update_SEL24240V2D.exe file to begin the Lens System Software Updater.
- Remove the memory card from the camera
- Make sure the lens is attached the camera. Note: Make sure the camera is off before you attach the lens.
- Power on the camera. Note: If the camera has already been powered on, power it off and then back on again.
- On the camera, press the Menu button, select Setup, and then USB Connection and make sure Mass Storage is selected (this step isn’t necessary if you are using a QX series camera).
- Connect the camera to your computer using the supplied USB cable.
- On the computer, the Lens System Software Updater window appears, and on the camera, the screen displays the message Follow computer instructions. Notes:
- If the message The update isn’t available for your model appears on the screen, make sure the System Software update is the correct file for the lens you have attached. If the file is correct for the lens, close the Lens System Software Updater program, disconnect the USB cable, power off the camera, restart the Lens System Software Updater program, and then continue the procedure.
- If the message Could not find the camera with the lens for this update mounted appears on the screen, make sure you are using a a camera with the Fast Hybrid AF function, try disconnecting and reconnection the USB cable, and try another USB port on the computer.
- Verify that the remove hardware icon or is displayed in the task tray at the lower right-hand corner of the computer screen.
- At the Lens System Software Updater window, click Next. WARNING! Don’t power off the camera or disconnect the USB cable until the update process is complete.
- When the following screen is displayed, check the version number at the lower left. Note: If the current version is Ver.02, your camera lens doesn’t need this update. Stop the USB connection by clicking the remove hardware icon or in the task tray in the lower right corner of the computer screen, click the Finish button on the Lens System Software Updater screen, then power off the camera, briefly remove the battery pack or the AC adaptor, and then power on the camera again.
- If the current version is Ver.01, click Next.
- The lens system software transfer will start and a progress bar will be displayed showing the data transfer. Note: This part of the process takes about five minutes to complete.
- When the data transfer is complete and the following screen is displayed, click Finish.
- The update process starts and the progress bar is displayed on the camera screen.
- The update process is finished when the Lens update complete message is displayed on the camera screen.
- Stop the USB connection by clicking the remove hardware icon or in the task tray in the lower right corner of the computer screen.
- Disconnect the USB cable, power off the camera, and then remove the battery pack or AC adapter.
- Reconnect the battery pack or AC adapter and power on the camera.
- to confirm that the update has successfully installed.
- If the version is Ver.02, the firmware update was successful.
- If the version is not Ver.02, download and install the update again.
Sony FE 24-240mm f3.5-6.3 OSS Introduction
The Sony FE 24-240mm f/3.5-6.3 OSS is a new super-zoom lens for the Sony full-frame E-mount compact system cameras. It features Optical SteadyShot image stabilisation, has 17 elements in 12 groups including 5 aspherical elements and 1 ED glass element, is dust- and moisture-resistant, and has a minimum focusing distance of 50cm with a maximum magnification of 0.27x. It has a near-circular 7 blade diaphragm which creates an attractive blur to the out-of-focus areas of the image, while an internal focusing mechanism means the lens barrel doesn’t move. The Sony FE 24-240mm f/3.5-6.3 OSS lens is available for £929 / $999 in the UK and the US, respectively.
